- : 0086-21-61182423
- : 0086-21-61182425
- : [email protected]
- : Room 301,Unit 6,lane 2500,xiupu Road,Kangqiao Industrial Area,Pudong New District,Shanghai
- A709 Grade 36 carbon steel plate for bridge girders and welded structural members
- A656 Grade 80 HSLA steel plate for load-bearing fabrication and transport structures
- A656 Grade 70 HSLA steel plate for heavy load structures and lifting equipment
- A656 Grade 60 HSLA steel plate for heavy equipment and structural fabrication
- A656 Grade 50 HSLA steel plate for construction and heavy structural applications
- A633 Grade E normalized structural steel plate for heavy engineering and welded structures
- A633 Grade D normalized structural steel plate for heavy welded structures
- A633 Grade C normalized structural steel plate for welded engineering applications
- A633 Grade A normalized high‑strength steel plate for welded structural applications
- A588 Grade K weathering steel plate for long‑life infrastructure projects
A709 Grade 36 carbon steel plate for bridge girders and welded structural members
A709 Grade 36 is a carbon structural steel plate produced to the ASTM A709/A709M bridge steel specification, with a minimum yield strength of 250 MPa (36 ksi) and a tensile range of 400–550 MPa. The grade follows the A36 chemistry but is supplied against the stricter bridge standard, which adds mandatory Charpy impact testing by temperature zone for both non-fracture-critical and fracture-critical members. It is commonly used for bridge girders, cross frames, bearing stiffeners and other welded or bolted load-bearing components.
Chemical Composition (ASTM A709/A709M)
Carbon: ≤ 0.26% Manganese: 0.80–1.20% (plates over 20 mm) Silicon: ≤ 0.40% Phosphorus: ≤ 0.030% Sulfur: ≤ 0.030% Copper: ≥ 0.20% when copper-bearing steel is specified
Carbon limits are thickness-dependent, and the exact heat analysis is stated on the mill certificate. The low carbon and controlled manganese content give the grade reliable weldability for bridge fabrication without preheat in normal thickness ranges.
Mechanical Properties
A709 Grade 36 provides a minimum yield strength of 250 MPa (36 ksi) and a tensile strength of 400–550 MPa. Elongation is at least 20% in 200 mm and 23% in 50 mm, which reflects the ductility required for welded bridge members under static and dynamic loading. These values apply to plates up to 100 mm, with elongation adjusted by thickness according to ASTM A6. Charpy V-notch impact testing is performed according to the A709 temperature zone and member classification specified in the project documents.
Available Size Range
Thickness: 3–100 mm Width: 1220–4200 mm Length: 5000–18000 mm
Stock & Processing Services
Cutting • Beveling • Drilling • Welding preparation • Plate forming • Customized fabrication
Applications
- Bridge girders and main beams
- Cross frames and bracing members
- Bearing plates and stiffeners
- Highway and railway bridge structures
- Welded load-bearing structural frames
- General heavy structural fabrication