- : 0086-21-61182423
- : 0086-21-61182425
- : [email protected]
- : Room 301,Unit 6,lane 2500,xiupu Road,Kangqiao Industrial Area,Pudong New District,Shanghai
- Improper welding of X80 pipeline may cause cracks
- Brief introduction of API X52 pipeline steel
- The difference between PSL1 and PSL2
- Harm of inclusions in X70 pipeline steel
- API 5L pipeline pipe
- X52 steel plate surface quality standards that need to be met
- The basic production process of API 5L X60 pipeline steel
- The key to Q460D steel welding process
- What does the heat treatment of Q690 Steel include?
- Reasons for choosing Q690D steel
S700MC is sensitive to high temperature
When building rail vehicles, during the process of processing, assembling, and welding the components of each part of the car body, due to the existence of stress, the structural parts will be deformed to varying degrees, such as bending and warping, especially after welding.
In order to ensure the assembly accuracy of the car body, it is generally necessary to use a flame method to correct the deformation of the deformed components. However, S700MC steel is a thermomechanically rolled fine-grained structural steel, which is sensitive to high temperature. Under different heating temperatures and cooling rates, the microstructure and mechanical properties of S700MC steel are quite different, which is likely to cause a sharp drop in toughness and plasticity.
With the increase of flame conditioning temperature, the impact properties of S700MC steel decreased significantly; but different conditioning temperatures had little effect on the bending, tensile properties and microhardness of S700MC steel. When S700MC steel is hot-tuned at 700°C and 800°C, its microstructure is equivalent to that of the untuned base metal, and it is ferrite and pearlite distributed in bands along the rolling direction, so this temperature is S700MC steel the most suitable thermal adjustment temperature.