- : 0086-21-61182423
- : 0086-21-61182425
- : [email protected]
- : Room 301,Unit 6,lane 2500,xiupu Road,Kangqiao Industrial Area,Pudong New District,Shanghai
- Improper welding of X80 pipeline may cause cracks
- Brief introduction of API X52 pipeline steel
- The difference between PSL1 and PSL2
- Harm of inclusions in X70 pipeline steel
- API 5L pipeline pipe
- X52 steel plate surface quality standards that need to be met
- The basic production process of API 5L X60 pipeline steel
- The key to Q460D steel welding process
- What does the heat treatment of Q690 Steel include?
- Reasons for choosing Q690D steel
Factors Affecting Welding Toughness of
The main factors affecting the toughness of the weld for EH32 Steel are: the chemical composition of the base metal, the plate thickness, the welding method of EH32 Steel, the welding material and the welding process, etc. After they are selected, the welding process of EH32 Steel is the main aspect that affects the toughness of the weld for EH32 Steel. When the welding heat input is increased, coarse grain boundary ferrite is formed in the weld, thereby reducing the toughness of the weld for EH32 Steel.
The toughness of the welding heat-affected zone is not adjusted and improved by adding trace elements like the weld for EH32 Steel, but is inherent in the base metal itself, which can only be improved within a certain range through some technological measures, such as using post-weld Heat treatment, reasonable selection of welding process parameters for EH32 Steel, etc. When the heat input is too large, the grains in the welding heat-affected zone will be coarsened and coarse austenite will be formed. At the same time, there will be a superheated zone with a high temperature in the heat-affected zone of EH32 Steel. The grain grows significantly and some refractory particles are melted in. The overheated and coarse austenite grains increase the stability of these refractory particles, so that the refractory particles have no time to precipitate during the cooling process of EH32 Steel and the material becomes brittle, thus reduces the toughness of the weld heat-affected zone.