• Improper welding of X80 pipeline may cause cracks
• Brief introduction of API X52 pipeline steel
• The difference between PSL1 and PSL2
• Harm of inclusions in X70 pipeline steel
• API 5L pipeline pipe
• X52 steel plate surface quality standards that need to be met
• The basic production process of API 5L X60 pipeline steel
• The key to Q460D steel welding process
• What does the heat treatment of Q690 Steel include?
• Reasons for choosing Q690D steel

Requirements of Dimensional and Appearance for S235JR steel plate

The dimensional error of S235JR steel plate has a great impact on its processing and use. According to the national standard GB/T700 2006, the thickness error of S235JR steel plate is between 0.5mm and 1.5mm, the width error is between 0.2mm and 0.2mm, and the length error is between 0mm and 20mm.

The appearance quality of S235JR steel plate refers to the defects on the surface of the steel plate. If the surface of the S235JR steel plate is defective, its service life and aesthetics will be affected. According to the provisions of the national standard GB/T700 2006, the surface of S235JR steel plates shall not have defects such as oil stains, rust spots, burrs, and cracks, and the edges of the S235JR steel plates shall be straight, and defects such as burrs and cracks shall not be allowed.