- : 0086-21-61182423
- : 0086-21-61182425
- : [email protected]
- : Room 301,Unit 6,lane 2500,xiupu Road,Kangqiao Industrial Area,Pudong New District,Shanghai
- Improper welding of X80 pipeline may cause cracks
- Brief introduction of API X52 pipeline steel
- The difference between PSL1 and PSL2
- Harm of inclusions in X70 pipeline steel
- API 5L pipeline pipe
- X52 steel plate surface quality standards that need to be met
- The basic production process of API 5L X60 pipeline steel
- The key to Q460D steel welding process
- What does the heat treatment of Q690 Steel include?
- Reasons for choosing Q690D steel
EN 10025-2 S 355 JR Dimension
S355 steel is a low carbon steel whose specifications offer high yield strength. S355 JR Structural steel is used in freight cars, transmission towers, dump trucks, cranes, trailers, bull dozers, excavators, forestry machines, railway wagons, dolphins, penstocks, pipes, highway bridges, building structures, oil and gas platforms, offshore structures, shipbuilding, power plant, palm oil equipments and machineries.
Chemical composition % of gradeS355JR (1.0045):EN 10025-2-2004
Nominal thickness =< 30(mm)CEVmax = 0.45 |
C |
Si |
Mn |
P |
S |
N |
Cu |
CEV |
max0.24 |
max0.55 |
max1.6 |
max0.04 |
max0.04 |
max0.012 |
max0.55 |
max0.47 |
The table below show the mechanical properties of grade S355JR
|
Minimum yield strength Reh |
Tensile strength Rm |
Minimum elongation - A |
Notch impact test |
||||||||||
Steel grade |
Nominal thickness |
Nominal thickness |
Nominal thickness |
Temperature |
Min. absorbed energy |
|||||||||
|
≤16 |
>16 |
>40 |
>63 |
>80 |
>100 |
>3 |
>100 |
>3 |
>40 |
>63 |
>100 |
°C |
J |
S355JR |
355 |
345 |
335 |
325 |
315 |
295 |
470-630 |
450-600 |
22 |
21 |
20 |
18 |
+20 |
27 |
S355JR Steel Grade Equivalent Table
USA |
Japan |
France |
England |
Canada |
European old |
A572 |
SM490A |
E36-2 |
50B |
350W |
Fe510B |
Italy |
Belgium |
Spain |
China |
Portugal |
India |
Fe510B |
AE355B |
AE355B |
Q345C |
FE510-B |
IS961 |
Thickness8mm-300mm,
Width:1500-4000mm,
Length:3000-12000mm
We can supply any size based on customer΄s requirements.
S355JRDeliveryCondition:Hotrolled,CR,Normalized,Quenched,Tempering,Q+T,N+T,TMCP,Z15,Z25,Z35
We have our own processing factory and the pre- treatment factory, Surface pretreatment line technical parameters on steel plates and profile steel. And we can also make the customers enjoy our other pre-treatment services, like cutting, welding, drilling holes, galvanizing by the lowest cost price. We are a professional S355 JR Structural steel exporter and Stockist in china. Any need of S355 steel , please feel free to contact us by email or calling to us by email [email protected].