- : 0086-21-61182423
- : 0086-21-61182425
- : [email protected]
- : Room 301,Unit 6,lane 2500,xiupu Road,Kangqiao Industrial Area,Pudong New District,Shanghai
- Improper welding of X80 pipeline may cause cracks
- Brief introduction of API X52 pipeline steel
- The difference between PSL1 and PSL2
- Harm of inclusions in X70 pipeline steel
- API 5L pipeline pipe
- X52 steel plate surface quality standards that need to be met
- The basic production process of API 5L X60 pipeline steel
- The key to Q460D steel welding process
- What does the heat treatment of Q690 Steel include?
- Reasons for choosing Q690D steel
EN 10149-2 High strength low alloy steels
EN 10149-2 is the European Standard for hot-rolled flat products made of high yield strength thermo-mechanically rolled steels for cold forming. Steels encompassed by this specification have minimum yield strengths ranging from 315 MPa to 460 MPa for thicknesses ranging from 1.5 mm up to 20 mm.
EN 10149-2 Mechanical propertie:
Direction |
Thickness (mm) |
Re (MPa) |
Rm (MPa) |
A 5.65√So (%) |
Bending ratio (th) |
|
S315MC EN 10149-2 |
L |
6 - 20 |
≥ 315 |
390 - 510 |
≥ 24 |
- |
S355MC EN 10149-2 |
L |
6 - 20 |
≥ 355 |
430 - 550 |
≥ 23 |
- |
T |
6 - 20 |
- |
- |
- |
≥ 0.5 |
|
S420MC EN 10149-2 |
L |
6 - 20 |
≥ 420 |
480 - 620 |
≥ 19 |
- |
T |
6 - 20 |
- |
- |
- |
≥ 0.5 |
|
S460MC EN 10149-2 |
L |
6 - 20 |
≥ 460 |
520 - 670 |
≥ 17 |
- |
T |
6 - 20 |
- |
- |
- |
≥ 1 |
|
S500MC EN 10149-2 |
L |
6 - 16 |
≥ 500 |
550 - 700 |
≥ 14 |
- |
T |
6 - 16 |
- |
- |
- |
≥ 1 |
EN 10149-2 Chemical compositio:
C (%) |
Mn (%) |
P (%) |
S (%) |
Si (%) |
Al (%) |
Nb (%) |
V (%) |
Ti (%) |
|
S315MC EN 10149-2 |
≤ 0.12 |
≤ 1.30 |
≤ 0.025 |
≤ 0.020 |
≤ 0.50 |
≥ 0.015 |
≤ 0.090 |
≤ 0.20 |
≤ 0.150 |
S355MC EN 10149-2 |
≤ 0.12 |
≤ 1.50 |
≤ 0.025 |
≤ 0.020 |
≤ 0.50 |
≥ 0.015 |
≤ 0.090 |
≤ 0.20 |
≤ 0.150 |
S420MC EN 10149-2 |
≤ 0.12 |
≤ 1.60 |
≤ 0.025 |
≤ 0.015 |
≤ 0.50 |
≥ 0.015 |
≤ 0.090 |
≤ 0.20 |
≤ 0.150 |
S460MC EN 10149-2 |
≤ 0.12 |
≤ 1.60 |
≤ 0.025 |
≤ 0.015 |
≤ 0.50 |
≥ 0.015 |
≤ 0.090 |
≤ 0.20 |
≤ 0.150 |
S500MC EN 10149-2 |
≤ 0.12 |
≤ 1.70 |
≤ 0.025 |
≤ 0.015 |
≤ 0.50 |
≥ 0.015 |
≤ 0.090 |
≤ 0.20 |
≤ 0.150 |
High strength low alloy steels combine excellent mechanical properties, such as durability, fatigue resistance and impact resistance, with good formability and weldability. They are an excellent choice where weight reduction is a priority. Because of their high yield strength, they are frequently used as an alternative to structural steels.
EN 10149-2 Application:
Oscillation Damper
Sand Chamber
Oil Chamber
Foundation Plates
Embedment Rings
Flanges from Plates
Internal Weldments
Phone: 0086-18317160019
TEL: 0086-21-61182423
Fax: 0086-21-61182425
E-mail: [email protected]
Skype: shanghai.katalor
Address : Room 301,Unit 6,lane 2500,xiupu Road,Kangqiao Industrial Area,Pudong New District,Shanghai