- : 0086-21-61182423
- : 0086-21-61182425
- : [email protected]
- : Room 301,Unit 6,lane 2500,xiupu Road,Kangqiao Industrial Area,Pudong New District,Shanghai
- Improper welding of X80 pipeline may cause cracks
- Brief introduction of API X52 pipeline steel
- The difference between PSL1 and PSL2
- Harm of inclusions in X70 pipeline steel
- API 5L pipeline pipe
- X52 steel plate surface quality standards that need to be met
- The basic production process of API 5L X60 pipeline steel
- The key to Q460D steel welding process
- What does the heat treatment of Q690 Steel include?
- Reasons for choosing Q690D steel
Steel Grade 1.0044 Type Weakness
1.0044 Mechanical properties, Our production completely according to the 1.0044 standards to meet the 1.0044 mechanical performance, can also according to the customer request, to meet the requirements of customers of 1.0044 mechanical properties.
Chemical composition % of grade S275JR (1.0044): EN 10025-2-2004
Nominal thickness =< 40(mm)Cmax = 0.21 |
C |
Mn |
P |
S |
N |
Cu |
CEV |
max 0.22 |
max 1.5 |
max 0.04 |
max 0.04 |
max 0.012 |
max 0.55 |
max 0.42 |
Mechanical properties of grade S275JR (1.0044)
Nominal thickness (mm): |
to 3 |
3 - 100 |
100 - 150 |
150 - 250 |
Rm- Tensile strength (MPa) Flat and long products |
430-580 |
410-560 |
400-540 |
380-540 |
Nominal thickness (mm): |
to 16 |
16 - 40 |
40 - 63 |
63 - 80 |
80 - 100 |
100 - 150 |
150 - 200 |
200 - 250 |
ReH- Minimum yield strength (MPa) Flat and long products |
275 |
265 |
255 |
245 |
235 |
225 |
215 |
205 |
KV- Impact energy (J) longitud., |
-20° |
0° |
+20° |
Nominal thickness (mm): |
to 1 |
1 - 1.5 |
1.5 - 2 |
2 - 2.5 |
2.5 - 3 |
A- Min. elongation Lo = 80 mm (%) parallel, |
15 |
16 |
17 |
18 |
19 |
Nominal thickness (mm): |
3 - 40 |
40 - 63 |
63 - 100 |
100 - 150 |
150 - 250 |
A- Min. elongation Lo = 5,65 √ So (%) parallel, |
23 |
22 |
21 |
19 |
18 |
Heat treatment
Our production completely according to the 1.0044 standards to meet the 1.0044 Heat treatment, can also according to the customer request, to meet the requirements of customers of 1.0044 Heat treatment.
Machining
Our production completely according to the 1.0044 standards to meet the 1.0044 Machining, can also according to the customer request, to meet the requirements of customers of 1.0044 Machining.
Our production completely according to the 1.0044 standards to meet the 1.0044 Welding performance, can also according to the customer request, to meet the requirements of customers of 1.0044 Welding performance.
Shanghai Katalor Enterprises Co., Ltd is a big complex combined steel stockist whose business related with trade, processing, storage and transportation. we are specialized in supplying Steel Grade 1.0044 . We have the good quality and advanced equipment, our products meet the state standard, and also available for customers' requirement. If you have any need of Steel Grade 1.0044 , please do not hesitate to contact us by email [email protected], we can do our best to help you!