HOT News

• Improper welding of X80 pipeline may cause cracks
• Brief introduction of API X52 pipeline steel
• The difference between PSL1 and PSL2
• Harm of inclusions in X70 pipeline steel
• API 5L pipeline pipe
• X52 steel plate surface quality standards that need to be met
• The basic production process of API 5L X60 pipeline steel
• The key to Q460D steel welding process
• What does the heat treatment of Q690 Steel include?
• Reasons for choosing Q690D steel

Alloy structural steel 30CrNi3Mo plate

Posted:2021-08-12 14:05:15

30CrNi3Mo is an alloy structural steel. The 30CrNi3Mo steel plate is heat treated by high temperature tempering.

Alloy structural steel 30CrNi3Mo plate heat treatment specification and metallographic structure:
Heat treatment specification: 840-860℃ oil quenching + 520～590℃ tempering, oil cooling.
Metallographic structure: 1) Martensite after quenching;
2) After quenching and high temperature tempering, it becomes tempered sorbite.

30CrNi3Mo steel chemical composition:

C	Si	Mn	S	P	Cr	Ni	Mo
0.30-0.40	0.17-0.37	0.50-0.80	≤0.020	≤0.025	1.10-1.70	2.75-3.25	0.25-0.40

30CrNi3Mo steel mechanical properties:

Tensile strength	Yield Strength	Elongation	Rate of reduction in area	Impact toughness value	Hardness
755-900	590-785	12-14	32-40	32-55	241-341HB

30CrNi3Mo steel has high hardenability. After quenching and high temperature tempering, uniform strength, high plasticity, toughness, fatigue strength, low cold brittle transition temperature and notch sensitivity can be obtained on a large section.