Contact us
- : 0086-21-61182423
- : 0086-21-61182425
- : [email protected]
- : Room 301,Unit 6,lane 2500,xiupu Road,Kangqiao Industrial Area,Pudong New District,Shanghai
HOT News
- Improper welding of X80 pipeline may cause cracks
- Brief introduction of API X52 pipeline steel
- The difference between PSL1 and PSL2
- Harm of inclusions in X70 pipeline steel
- API 5L pipeline pipe
- X52 steel plate surface quality standards that need to be met
- The basic production process of API 5L X60 pipeline steel
- The key to Q460D steel welding process
- What does the heat treatment of Q690 Steel include?
- Reasons for choosing Q690D steel
Basic knowledge of SS400 steel
Posted:2021-10-30 10:25:14
1. SS400 is a marking method for Japanese steel, which is equal to the Chinese Q235 steel. Q represents the yield of this material, and the latter 235 refers to the yield value of this material, which is around 235. And as the thickness of the material increases, its yield value decreases. Due to the moderate carbon content, the overall performance is better, the strength, plasticity and welding properties are better matched, and the use is the most extensive.
2. SS400 steel is a representation of Japanese steel material, and it is a judgment standard, which is equivalent to domestic Q235 steel (also known as A3 steel). Foreign standard structural steels are often classified according to their tensile strength, such as SS400 (as marked in Japan), where 400 means that the minimum value of σb is 400MPa.
3. SS400 steel chemical composition:
4. Mechanical properties of SS400 steel:
5. SS400 steel is often rolled into wire rod or round steel, square steel, flat steel, angle steel, I-beam, channel steel, window frame steel, etc., and medium-thick steel plate. It is widely used in construction and engineering structures. It is used to make steel bars or to build factory buildings, high-voltage power transmission towers, bridges, vehicles, boilers, containers, ships, etc., and it is also used as a large number of mechanical parts with low performance requirements.
2. SS400 steel is a representation of Japanese steel material, and it is a judgment standard, which is equivalent to domestic Q235 steel (also known as A3 steel). Foreign standard structural steels are often classified according to their tensile strength, such as SS400 (as marked in Japan), where 400 means that the minimum value of σb is 400MPa.
3. SS400 steel chemical composition:
C | Si | Mn | S | P |
≤0.17 | ≤0.50 | ≤1.40 | 0.035 | ≤0.035 |
4. Mechanical properties of SS400 steel:
Tensile strength (σb/MPa) | SS400 yield point (σs/MPa) | SS400elongation after breaking (δ5/%) | SS400impact energy Akv -20℃ | SS400sample size |
340-470 | 235 | 24 | ≥27J | The sample blank size is 18mm |
5. SS400 steel is often rolled into wire rod or round steel, square steel, flat steel, angle steel, I-beam, channel steel, window frame steel, etc., and medium-thick steel plate. It is widely used in construction and engineering structures. It is used to make steel bars or to build factory buildings, high-voltage power transmission towers, bridges, vehicles, boilers, containers, ships, etc., and it is also used as a large number of mechanical parts with low performance requirements.
InquiryPlease feel free to give your inquiry in the form below. we will reply you quickly!