Contact us
- : 0086-21-61182423
- : 0086-21-61182425
- : [email protected]
- : Room 301,Unit 6,lane 2500,xiupu Road,Kangqiao Industrial Area,Pudong New District,Shanghai
HOT News
- Improper welding of X80 pipeline may cause cracks
- Brief introduction of API X52 pipeline steel
- The difference between PSL1 and PSL2
- Harm of inclusions in X70 pipeline steel
- API 5L pipeline pipe
- X52 steel plate surface quality standards that need to be met
- The basic production process of API 5L X60 pipeline steel
- The key to Q460D steel welding process
- What does the heat treatment of Q690 Steel include?
- Reasons for choosing Q690D steel
High-strength quenched and tempered Q960E steel plate
Posted:2021-12-29 09:57:49
Heat treatment state of Q960E steel plate: quenched and tempered (Q+T).
Q960E steel plate technical standard: GB/T 16270
Q960E high-strength quenched and tempered steel plate for high-strength structure has a yield strength greater than or equal to 960MPa, has a high yield strength and tensile strength, and has great resistance to brittle failure.
Melting analysis of chemical composition of Q960E steel plate:
Composition Remarks: At least one grain refinement element of Nb, Ti, V, Al is added to the steel, and the minimum amount of at least one element is 0.015 (Als for Al). Alt can be used instead of Als, in this case Alt ≥ 0.018. Ceq = C+Mn/6+(Cr+Mo+V)/5+(Ni+Cu)/15
Mechanical properties of Q960E steel plate:
Q960E steel plate has excellent low temperature toughness, so it can be used in large welded structural parts and low temperature environments.
Q960E steel plate technical standard: GB/T 16270
Q960E high-strength quenched and tempered steel plate for high-strength structure has a yield strength greater than or equal to 960MPa, has a high yield strength and tensile strength, and has great resistance to brittle failure.
Melting analysis of chemical composition of Q960E steel plate:
C | Si | Mn | P | S | Ni | Cr | Mo | Cu | Nb | V | Ti | B | CeqMax |
≤0.2 | ≤0.8 | ≤2 | ≤0.02 | ≤0.010 | ≤2 | ≤1.5 | ≤0.7 | ≤0.5 | ≤0.06 | ≤0.12 | ≤0.05 | ≤0.005 | ≤0.82 |
Composition Remarks: At least one grain refinement element of Nb, Ti, V, Al is added to the steel, and the minimum amount of at least one element is 0.015 (Als for Al). Alt can be used instead of Als, in this case Alt ≥ 0.018. Ceq = C+Mn/6+(Cr+Mo+V)/5+(Ni+Cu)/15
Mechanical properties of Q960E steel plate:
Thickness | Mechanical properties | ||
≤50mm | ReH(MPa) | ≥960 | When the yield is not obvious, use Rp0.2 |
Rm(MPa) | 980-1150 | ||
A(%) | ≥10 | ||
Impact temperature | -40 | ||
Akv(J) | ≥27 | Longitudinal |
Q960E steel plate has excellent low temperature toughness, so it can be used in large welded structural parts and low temperature environments.
InquiryPlease feel free to give your inquiry in the form below. we will reply you quickly!