Contact us
- : 0086-21-61182423
- : 0086-21-61182425
- : [email protected]
- : Room 301,Unit 6,lane 2500,xiupu Road,Kangqiao Industrial Area,Pudong New District,Shanghai
HOT News
- Improper welding of X80 pipeline may cause cracks
- Brief introduction of API X52 pipeline steel
- The difference between PSL1 and PSL2
- Harm of inclusions in X70 pipeline steel
- API 5L pipeline pipe
- X52 steel plate surface quality standards that need to be met
- The basic production process of API 5L X60 pipeline steel
- The key to Q460D steel welding process
- What does the heat treatment of Q690 Steel include?
- Reasons for choosing Q690D steel
Performance and use of No. 10 steel
Posted:2021-07-12 15:36:58
No. 10 steel is delivered without heat treatment or heat treatment (annealing, normalizing or high temperature tempering). If the delivery is required to be delivered under heat treatment, it should be indicated in the contract, and if it is not specified, the No. 10 steel shall be delivered without heat treatment.
No. 10 steel executive standard: GB/T711
Chemical composition of No. 10 steel:
Carbon C: 0.07-0.14
Silicon Si: 0.17-0.37
Manganese Mn: 0.35-0.65
Sulfur S: ≤0.04
Phosphorus P: ≤0.35
Chromium Cr: ≤0.15
Nickel Ni: ≤0.25
Copper Cu: ≤0.25
Mechanical properties of No. 10 steel:
Tensile strength σb (MPa): ≥335
Yield strength σs (MPa): ≥205
Elongation δ5 (%): ≥31
Reduction of area ψ (%): ≥55,
Hardness: not heat-treated ≤137HBS,
Sample size: 25mm longitudinally
No. 10 steel heat treatment specification and metallographic structure:
Heat treatment specification: normalizing, 910℃, air cooling
Metallographic structure: ferrite + pearlite.
No. 10 steel can be used to manufacture parts that require low stress and high toughness, such as car bodies, receptacles, deep drawing vessels, pipes, gaskets, etc., and can be used for cold rolling, cold stamping, cold heading, cold bending, and hot forming. It can be formed by rolling and other processes, and can also be used as carburized parts and carbonitrided parts with low core strength.
No. 10 steel executive standard: GB/T711
Chemical composition of No. 10 steel:
Carbon C: 0.07-0.14
Silicon Si: 0.17-0.37
Manganese Mn: 0.35-0.65
Sulfur S: ≤0.04
Phosphorus P: ≤0.35
Chromium Cr: ≤0.15
Nickel Ni: ≤0.25
Copper Cu: ≤0.25
Mechanical properties of No. 10 steel:
Tensile strength σb (MPa): ≥335
Yield strength σs (MPa): ≥205
Elongation δ5 (%): ≥31
Reduction of area ψ (%): ≥55,
Hardness: not heat-treated ≤137HBS,
Sample size: 25mm longitudinally
No. 10 steel heat treatment specification and metallographic structure:
Heat treatment specification: normalizing, 910℃, air cooling
Metallographic structure: ferrite + pearlite.
No. 10 steel can be used to manufacture parts that require low stress and high toughness, such as car bodies, receptacles, deep drawing vessels, pipes, gaskets, etc., and can be used for cold rolling, cold stamping, cold heading, cold bending, and hot forming. It can be formed by rolling and other processes, and can also be used as carburized parts and carbonitrided parts with low core strength.
InquiryPlease feel free to give your inquiry in the form below. we will reply you quickly!