Contact us
- : 0086-21-61182423
- : 0086-21-61182425
- : [email protected]
- : Room 301,Unit 6,lane 2500,xiupu Road,Kangqiao Industrial Area,Pudong New District,Shanghai
HOT News
- Improper welding of X80 pipeline may cause cracks
- Brief introduction of API X52 pipeline steel
- The difference between PSL1 and PSL2
- Harm of inclusions in X70 pipeline steel
- API 5L pipeline pipe
- X52 steel plate surface quality standards that need to be met
- The basic production process of API 5L X60 pipeline steel
- The key to Q460D steel welding process
- What does the heat treatment of Q690 Steel include?
- Reasons for choosing Q690D steel
Technical requirements of submarine steel
Posted:2021-05-26 10:32:50
Because the submarine is sailing and fighting in the deep sea, the service conditions are very harsh, so the requirements for submarine steel are very strict. It can be said that submarine steel is the most stringent type of low-alloy high-strength steel, which mainly requires high yield strength, high toughness and high blast resistance, good weldability, high toughness, good seawater corrosion resistance and low cycle fatigue resistance.
Submarine steel must have good seawater corrosion resistance. The working environment of submarine is ocean. Seawater is a complex equilibrium solution of many kinds of salts, which contains organisms, suspended sediment, dissolved gases and corrosive organic matter. Therefore, seawater is not a simple salt solution. The average salinity of sea water is 35%, of which 90% is chloride, 10% is sulfate and 0.2% is carbonate. It is required that the corrosion of the material in seawater is uniform and small; At the stress concentration, there is no local corrosion; There is no stress corrosion in high strength submarine steel.
Submarine steel must have good seawater corrosion resistance. The working environment of submarine is ocean. Seawater is a complex equilibrium solution of many kinds of salts, which contains organisms, suspended sediment, dissolved gases and corrosive organic matter. Therefore, seawater is not a simple salt solution. The average salinity of sea water is 35%, of which 90% is chloride, 10% is sulfate and 0.2% is carbonate. It is required that the corrosion of the material in seawater is uniform and small; At the stress concentration, there is no local corrosion; There is no stress corrosion in high strength submarine steel.
InquiryPlease feel free to give your inquiry in the form below. we will reply you quickly!