- : 0086-21-61182423
- : 0086-21-61182425
- : [email protected]
- : Room 301,Unit 6,lane 2500,xiupu Road,Kangqiao Industrial Area,Pudong New District,Shanghai
- Improper welding of X80 pipeline may cause cracks
- Brief introduction of API X52 pipeline steel
- The difference between PSL1 and PSL2
- Harm of inclusions in X70 pipeline steel
- API 5L pipeline pipe
- X52 steel plate surface quality standards that need to be met
- The basic production process of API 5L X60 pipeline steel
- The key to Q460D steel welding process
- What does the heat treatment of Q690 Steel include?
- Reasons for choosing Q690D steel
What is the difference between RMRS grade D steel plate and ABS Gr D plate
What is the difference between RMRS grade D steel plate and ABS Gr D plate? Actually, the Chemical Composition and mechanical properties of RMRS grade D steel plate and ABS Gr D plate are totally same. The only difference is the certified classification society is different. One is by Russia classification society RMRS, and the other is by American classification society ABS. On the market, RMRS grade D steel plate is less popular than ABS Gr D plate.
RMRS grade D steel plate chemical composition:
Grade | The Element Max (%) | |||||
C | Si | Mn | P | S | C+Mn/6 | |
RMRS grade D | 0.21 | 0.10-0.35 | 0.6 | 0.035 | 0.035 | 0.4 |
RMRS grade D steel plate mechanical properties:
Grade | Yield strength MPa | Tensile strength MPa | Elongation Min,% | |
200mm | 50mm | |||
RMRS grade D | 400-520 | 235min | 21 | 24 |
RMRS grade D steel plate is common strength steel for hull constructions. Its low temperature impacting test shall be done under minus 20 centi degree. RMRS grade D steel plate is mainly used in shipbuilding project and ocean offshore structural project.