- : 0086-21-61182423
- : 0086-21-61182425
- : [email protected]
- : Room 301,Unit 6,lane 2500,xiupu Road,Kangqiao Industrial Area,Pudong New District,Shanghai
- Improper welding of X80 pipeline may cause cracks
- Brief introduction of API X52 pipeline steel
- The difference between PSL1 and PSL2
- Harm of inclusions in X70 pipeline steel
- API 5L pipeline pipe
- X52 steel plate surface quality standards that need to be met
- The basic production process of API 5L X60 pipeline steel
- The key to Q460D steel welding process
- What does the heat treatment of Q690 Steel include?
- Reasons for choosing Q690D steel
ASTM A283 Gr A,B,C,D Low and Intermediate Tensile Strength Carbon Steel Plates
ASTM A283 Gr A,B,C,D steel specification covers four grades of low carbon steel plates of structural quality for general application. Grades A, B, C and D.
ASTM A283 Gr A,B,C,D Low and Intermediate Tensile Strength Carbon Steel Plates Chemical Properties
|
Grade A |
Grade B |
Grade C |
Grade D |
Carbon, max |
0.14 |
0.17 |
0.24 |
0.27 |
Manganese, max |
0.90 |
0.90 |
0.90 |
0.90 |
Phosphorus, max |
0.035 |
0.035 |
0.035 |
0.035 |
Sulphur, max |
0.04 |
0.04 |
0.04 |
0.04 |
Silicon |
0.40 |
0.40 |
0.40 |
0.40 |
Copper min % when copper steel is specified |
0.20 |
0.20 |
0.20 |
0.20 |
ASTM A283 Gr A,B,C,D Low and Intermediate Tensile Strength Carbon Steel Plates Mechanical Properties
|
Grade A |
Grade B |
Grade C |
Grade D |
Tensile Strength: |
45,000 -60,000 psi |
50,000 -65,000 psi |
55,000 75,000 psi |
60,000 -80,000 psi |
Min. Yield Point: |
24,000psi |
27,000psi |
30,000psi |
33,000psi |
Elongation in 8": |
27% min |
25% min |
22% min |
20% min |
Elongation in 2": |
38% min |
28% min |
25% min |
23% min |
Katalor steel as a steel factory in China,offer all kinds of specification ASTM A283 Gr A,B,C,D Low and Intermediate Tensile Strength Carbon Steel Plates,if you need ASTM A283 Gr A,B,C,D steel,contact us now!