- : 0086-21-61182423
- : 0086-21-61182425
- : [email protected]
- : Room 301,Unit 6,lane 2500,xiupu Road,Kangqiao Industrial Area,Pudong New District,Shanghai
- Improper welding of X80 pipeline may cause cracks
- Brief introduction of API X52 pipeline steel
- The difference between PSL1 and PSL2
- Harm of inclusions in X70 pipeline steel
- API 5L pipeline pipe
- X52 steel plate surface quality standards that need to be met
- The basic production process of API 5L X60 pipeline steel
- The key to Q460D steel welding process
- What does the heat treatment of Q690 Steel include?
- Reasons for choosing Q690D steel
EN 10028 – P460NH, P460NL1, P460NL2
P460NH, so called for having a minimum yield strength of 460 MPa, is is a high quality pressure vessel steel grade for use in boiler and pressure vessel fabrication. It is a normalised fine grain steel with good weldability characteristics.
Other grade types include...
• NL1 – is ideal for use in low temperatures
• NL2 – is ideal for use in especially low temperatures
P460NH is also used in sour gas applications where the steel will be HIC Tested to gauge the materials susceptibility to hydrogen induced cracking
Please refer to the data tables below for more information.
Table 1: Chemical Composition of EN 10028 P460 NH, P460 NL1 & P460 NL2
Chemical element composition is % by mass.
Element |
P460NH |
P460NL1 |
P460NL2 |
Element |
P460NH |
P460NL1 |
P460NL2 |
Carbon (C) |
0.20 |
0.20 |
0.20 |
Silicon (Si) |
0.60 |
0.60 |
0.60 |
Manganese (Mn) |
1.10 to 1.70 |
1.10 to 1.70 |
1.10 to 1.70 |
Phosphorous (P) |
0.025 |
0.025 |
0.020 |
Sulphur (S) |
0.015 |
0.015 |
0.010 |
Chromium (Cr) |
0.30 |
0.30 |
0.30 |
Molybdenum (Mo) |
0.10 |
0.10 |
0.10 |
Nickel (Ni) |
0.80 |
0.80 |
0.80 |
Niobium (Nb) |
0.05 |
0.05 |
0.05 |
Titanium (Ti) |
0.03 |
0.03 |
0.03 |
Vanadium (V) |
0.20 |
0.20 |
0.20 |
Nitrogen (N) |
0.025 |
0.025 |
0.025 |
Aluminium (Al) |
0.020 |
0.020 |
0.020 |
Copper (Cu) |
0.70 |
0.70 |
0.70 |
The combined quantities of Niobium, Titanium and Vanadium should be 0.22% max.
Table 2: Mechanical Properties of EN 10028 P460 NH, P460 NL1 & P460 NL2
Grade |
Type |
Thickness |
Yield Strength |
Tensile Strength |
Elongation |
P460 NH |
Normalized |
≤ 16 |
460 |
570 to 750 |
17 |
(Please note: the technical information above is for guidance only – for exact specifications please check with our Sales Team)