- : 0086-21-61182423
- : 0086-21-61182425
- : [email protected]
- : Room 301,Unit 6,lane 2500,xiupu Road,Kangqiao Industrial Area,Pudong New District,Shanghai
- Improper welding of X80 pipeline may cause cracks
- Brief introduction of API X52 pipeline steel
- The difference between PSL1 and PSL2
- Harm of inclusions in X70 pipeline steel
- API 5L pipeline pipe
- X52 steel plate surface quality standards that need to be met
- The basic production process of API 5L X60 pipeline steel
- The key to Q460D steel welding process
- What does the heat treatment of Q690 Steel include?
- Reasons for choosing Q690D steel
EN 10025-2 S235J0 steel
Non-alloy structural steels
Material no. 1.0114
according to EN 10025-2
Tensile strength class A
S235J0 steel Usage
Hot rolled products of structural steels EN 10025-2 S235J0 steel equal to Chinese
standard steel grade GB_Q235C.These two steel grades are both done low
Temperature impacting test at zero centi degree
Suitability for coldforming such as bending, folding, bordering and flanging etc. S235j0 steel can be ordered separately. The user of S235j0 steel must make sure that his calculation, design and processing methods are appropriate for the material. The welding technique used must be suitable for the intended application and comply with the state-of-theart. With distinctly closer chemical composition values and mechanical properties, S235j0 steel is used as material for wheels of passenger cars, lorries and other vehicles.
S235j0 steel Chemical composition
Grade | C≤ 16mm max |
C>16mm max |
Si max |
Mn max |
P max. |
S max. |
S235J0 | 0.17 | 0.17 | -- | 1.40 | 0.045 | 0.045 |
2) Copper contents higher than 0.400% can cause exfoliation corrosion.
3) Maximum carbon equivalent value
CE = C + Mn /6 + (Cr + Mo + V) /5 + (Cu + Ni) /15
S235j0 steel Mechanical properties
Thickness |
Yield Strength ReH [N/mm2] transv.min. |
Tensile Strength Rm [N/mm2] transv. | Fracture Elongation[%]transv. min. |
t≤ 16mm t >16mm |
235 225 |
||
t < 3mm |
360-510 340-470 |
||
Up to 1.5mm |
16 17 18 19 24 |