- : 0086-21-61182423
- : 0086-21-61182425
- : [email protected]
- : Room 301,Unit 6,lane 2500,xiupu Road,Kangqiao Industrial Area,Pudong New District,Shanghai
- Improper welding of X80 pipeline may cause cracks
- Brief introduction of API X52 pipeline steel
- The difference between PSL1 and PSL2
- Harm of inclusions in X70 pipeline steel
- API 5L pipeline pipe
- X52 steel plate surface quality standards that need to be met
- The basic production process of API 5L X60 pipeline steel
- The key to Q460D steel welding process
- What does the heat treatment of Q690 Steel include?
- Reasons for choosing Q690D steel
Grade S355MC
Grade S355MC is an high yield strength alloy steel for cold forming. S355MC steel number is 1.0976. This alloy is supplied in hot rolled flats, plates and strips. EN 10149-2 S355MC grade steel is commonly used for automotive structural parts such as automobile frames and beams that require good cold forming properties and high yield strength requirements.
S355MC Steel Chemical Composition
Grade Chemical Composition a (Heat Analysis) (%)
Grade |
Chemical Composition a (Heat Analysis) (%) |
||||||
C |
Si |
Mn |
P |
S |
Alt |
Others |
|
S355MC |
≤0.12 |
≤0.50 |
≤1.30 |
≤0.030 |
≤0.025 |
≥0.015 |
Nb≤0.09 V≤0.20 Ti≤0.15 |
S355MC SteelMechanical properties
|
Tensile Test |
180°Bending Test b Diameter |
|||
ReH |
Rm |
Elongation (%) |
|||
L0=80mm,b=20mm |
L0=5.65√S0 |
||||
Nominal Thickness(mm) |
|||||
<3.0 |
≥3.0 |
0.5a |
|||
S355MC |
≥340 |
420~540 |
≥19 |
≥25 |
0.5a |