- : 0086-21-61182423
- : 0086-21-61182425
- : [email protected]
- : Room 301,Unit 6,lane 2500,xiupu Road,Kangqiao Industrial Area,Pudong New District,Shanghai
- Improper welding of X80 pipeline may cause cracks
- Brief introduction of API X52 pipeline steel
- The difference between PSL1 and PSL2
- Harm of inclusions in X70 pipeline steel
- API 5L pipeline pipe
- X52 steel plate surface quality standards that need to be met
- The basic production process of API 5L X60 pipeline steel
- The key to Q460D steel welding process
- What does the heat treatment of Q690 Steel include?
- Reasons for choosing Q690D steel
S460N and S460NL normalized structural steel plate
With minimum yield strength 460Mpa,S460N steel and S460NL steel can work in the normal strength situiations when construction.
Besides the impacting test and Normalized heat treatment, customers usually indicate the following technical terms in their P/O:
I. PWHT (Simulated post-weld heat treatment), instruct temperature and time when rolling.
II. Ultrasonic examination or named UT.
III. DWTT for steel plate straight test.
IV. The third party inspection.
Our mill definately would issue all the above tests result on our MTC paper for customers' checking when finished rolling. We give the chemical elements contains sheet as bellows:
Steel Grade
S460N and S460NL Chemical Composition Max Heat Analysis
Grade | C max |
Si max |
Mn | P max |
S max. |
Cu max |
Cr max |
Ni max |
V max |
Nb max |
Al min |
||||
S460N | 0.20 | 0.60 | 1.00-1.70 | 0.030 | 0.025 | 0.55 | 0.30 | 0.50 | 0.12 | 0.05 | 0.02 | ||||
S460NL | 0.20 | 0.60 | 1.00-1.70 | 0.025 | 0.020 | 0.55 | 0.30 | 0.80 | 0.20 | 0.05 | 0.02 |
S460N and S460NL Mechanical properties
Thickness | Yield Strength ReH [N/mm2] transv.min. |
Tensile Strength Rm [N/mm2] transv. | Fracture Elongation[%]transv. min. | Notch Impact Energy1)Ch Vcomplete samplelongitud. min [J] |
||||
S460NL | S460N | S460NL | S460N | S460NL | S460N | S460NL | ||
t≤ 16mm t >16mm |
460 440 |
- | - |
+20 KV 31J |
+20 KV 40J |
|||
T < 3mm |
- | 540-720 | - | |||||
Up to 1.5mm |
- | - | 17 |