Contact us
- : 0086-21-61182423
- : 0086-21-61182425
- : [email protected]
- : Room 301,Unit 6,lane 2500,xiupu Road,Kangqiao Industrial Area,Pudong New District,Shanghai
HOT News
- Improper welding of X80 pipeline may cause cracks
- Brief introduction of API X52 pipeline steel
- The difference between PSL1 and PSL2
- Harm of inclusions in X70 pipeline steel
- API 5L pipeline pipe
- X52 steel plate surface quality standards that need to be met
- The basic production process of API 5L X60 pipeline steel
- The key to Q460D steel welding process
- What does the heat treatment of Q690 Steel include?
- Reasons for choosing Q690D steel
Delivery status and application scope of 20Mn steel plate
Posted:2021-07-03 14:30:20
Delivery state of 20Mn steel plate: 20Mn steel plate is usually delivered in the state of no heat treatment or heat treatment (annealing, normalizing or high temperature tempering). If the 20Mn steel plate is required to be delivered under heat treatment, it should be indicated in the contract, and if it is not specified, the 20Mn steel plate shall be delivered without heat treatment.
Chemical composition of 20Mn steel plate:
C: 0.17-0.23, Mn: 0.70-1.0, Si: 0.17-0.37, P≤0.035, Cr≤0.25, Ni≤0.25, Cu≤0.25, S≤0.035.
Mechanical properties of 20Mn steel plate:
Tensile strength ≥450 (46) MPa, yield strength ≥275 (28) MPa, elongation ≥24, reduction of area ≥50.
20Mn steel plate application range: 20Mn steel plate is suitable for gears, crankshafts, brackets, hinges, screws, nuts, riveting and welding structural parts, manufacturing oil tanks, etc.
Chemical composition of 20Mn steel plate:
C: 0.17-0.23, Mn: 0.70-1.0, Si: 0.17-0.37, P≤0.035, Cr≤0.25, Ni≤0.25, Cu≤0.25, S≤0.035.
Mechanical properties of 20Mn steel plate:
Tensile strength ≥450 (46) MPa, yield strength ≥275 (28) MPa, elongation ≥24, reduction of area ≥50.
20Mn steel plate application range: 20Mn steel plate is suitable for gears, crankshafts, brackets, hinges, screws, nuts, riveting and welding structural parts, manufacturing oil tanks, etc.
InquiryPlease feel free to give your inquiry in the form below. we will reply you quickly!