- : 0086-21-61182423
- : 0086-21-61182425
- : [email protected]
- : Room 301,Unit 6,lane 2500,xiupu Road,Kangqiao Industrial Area,Pudong New District,Shanghai
- Performance that API 5L X52 PSL2 pipeline steel should have
- Surface Quality Requirements of EH40 Steel plate
- Excellent properties and applications of EH40 shipbuilding Steel
- Influence of gas in 50CrMo4 steel plate
- Cause of Quenching Cracks in 50CrMo4
- Factors Affecting Welding Toughness of
- Z direction performance of EH32 steel plate
- Features of AR450 wear-resistant plate
- Characteristics of NM500 wear-resistant plate
- Harm of inclusions in API 5L X42 pipeline steel
1.5415 Steel Plate
1.5415 material is an alloy steel formulated for primary forming into wrought products. 1.5415 is the EN numeric designation for this material. 16Mo3 is the EN chemical designation. Cited properties are appropriate for the normalized condition.
Chemical Composition(cast analysis )
Element | % by mass | Element | % by mass |
Carbon (C) | 0.12 to 0.20 | Silicon (Si) | ≤0.35 |
Manganese (Mn) | 0.40 to 0.90 | Phosphorous (P) (max) | 0.025 |
Sulphur (S) (max) | 0.010 | Nickel (Ni) | ≤0.30 |
Nitrogen (N) | ≤0.012 | Chromium (Cr) | ≤0.30 |
Copper (Cu) | ≤0.30 | Molybdenum (Mo) | 0.25-0.35 |
Mechanical Properties:
Usual Delivery Condition |
Thickness (mm) |
Yield Strength MPa (min) |
Tensile Strength MPa |
Elongation % (min) |
Impact Energy (KV J) (min) |
||
-20° |
0° |
+20° |
|||||
Normalized |
≤ 16 |
235 |
360 to 480 |
24 |
27 |
34 |
40 |
16> to ≤40 |
225 |
360 to 480 |
24 |
27 |
34 |
40 |
|
40> to ≤60 |
215 |
360 to 480 |
24 |
27 |
34 |
40 |
|
60> to ≤100 |
200 |
360 to 480 |
24 |
27 |
34 |
40 |
|
100> to ≤150 |
185 |
350 to 480 |
24 |
27 |
34 |
40 |
|
150> to ≤250 |
170 |
350 to 480 |
24 |
27 |
34 |
40 |
1.5415 Plates Specification
Standard : AISI, ASTM, BS, DIN, GB, JIS
Thickness : 3 - 300 mm
Width : 1000 - 4000 mm
Length : 1000 -12000 mm
1.5415 Plate Processing
The normal processing can be performed on 1.5415 plates including
Cutting
Forming Drilling
Grinding
Testing
Available Grades:
P235GH
P265GH
P295GH
P355GH
16Mo3
Shanghai Katalor is located in Pudong district of Shanghai city. It is only 30 minutes from Pudong International airport to our company. If you have chance to China, we sincerely invite you to visit our factory. We have five big steel processing centers located in Shanghai City, Tianjin City, Qingdao City, Wuhan City and Nanyang City. Every processing center can process steel material 200,000 tons annually, So we have the 1.5415 plate machining capacity and offer the products processing like cutting, drilling, wedding, milling, turning, bending. We have the ability to produce every kinds of steel structural parts. If you need 1.5415 steel products, please be free to contact us.