- : 0086-21-61182423
- : 0086-21-61182425
- : [email protected]
- : Room 301,Unit 6,lane 2500,xiupu Road,Kangqiao Industrial Area,Pudong New District,Shanghai
- Improper welding of X80 pipeline may cause cracks
- Brief introduction of API X52 pipeline steel
- The difference between PSL1 and PSL2
- Harm of inclusions in X70 pipeline steel
- API 5L pipeline pipe
- X52 steel plate surface quality standards that need to be met
- The basic production process of API 5L X60 pipeline steel
- The key to Q460D steel welding process
- What does the heat treatment of Q690 Steel include?
- Reasons for choosing Q690D steel
304L stainless steel plate
304L stainless steel plate: 304L stainless steel panel , 304L stainless steel 8K plate
The distinctive feature uses of 304L stainless steel is corrosion-resistant, concentrated nitric acid and dilute nitric acid on the inherent corrosion resistance. This performance can easily make it from most other metals or alloys to be distinguished. However, high carbon steel 304 and 304L during the nitric acid test is slightly affected by corrosion.Non-ferrous metals will immediately be corroded once encounter concentrated nitric acid. The nitric acid has a strong corrosion on carbon steel.
304L stainless steel plate Chemical Composition :
|
Grade |
C % |
Si % |
Mn % |
P % |
S % |
Cr % |
Ni % |
|
00Cr19Ni10（0Cr18Ni10） |
≤ 0.03 |
≤ 1.0 |
≤2.00 |
≤0.035 |
≤0.03 |
18-20 |
9-13 |
304L stainless steel plate Properties :
| Tensile Strength N/mm2 |
≥520 |
|
|
Yield Strength N/mm2 |
≥205 |
|
|
Elongation % |
≥40 |
|
|
Hardness |
HB |
≤187 |
|
HRB |
≤90 |
|
|
HV |
≤200 |
|
|
Density g/cm3 |
7.93 |
|
|
Specific Heat J／g ℃ |
0.502c (20℃) |
|
|
Heat Conductivity W/m℃ |
12.1 (20℃ ) |
|
|
16.3 (100℃) |
||
|
21.4 (500℃) |
||
|
Linear Expansivity α/(10-6/℃) |
16 (20-100) |
|
|
16.8 (20-200) |
||
|
17.5 (20-300) |
||
|
18.1 (20-400) |
||
|
Resistivity |
0.73 Ω*mm2/m |
|
|
Melting Point ℃ |
1398-1420 |
|
|
Application |
|
|
The development of 304L stainless steel, has made it superior to other materials in corrosion resistance, appearance, workability, strength and other characteristics, and many of the stainless steel surface treatment method, you can get a variety of colors and shapes, which makes a great contribution to the stainless steel's development.
304L stainless steel plate is a variant of low-carbon 304 stainless steel, for the need for welding applications. Lower carbon content makes it close to the weld heat affected zone to minimize carbide precipitation, and carbide precipitation may result in intergranular corrosion (weld erosion).
Note: L on behalf of low-carbon, such as 304L lower carbon content than 304. H and S stands for high-temperature, such as 310S is stronger than 310, 304H is more heat-resisting than 304.
