- : 0086-21-61182423
- : 0086-21-61182425
- : [email protected]
- : Room 301,Unit 6,lane 2500,xiupu Road,Kangqiao Industrial Area,Pudong New District,Shanghai
- Improper welding of X80 pipeline may cause cracks
- Brief introduction of API X52 pipeline steel
- The difference between PSL1 and PSL2
- Harm of inclusions in X70 pipeline steel
- API 5L pipeline pipe
- X52 steel plate surface quality standards that need to be met
- The basic production process of API 5L X60 pipeline steel
- The key to Q460D steel welding process
- What does the heat treatment of Q690 Steel include?
- Reasons for choosing Q690D steel
ASTM A537 CL1 Weldable normalized fine grained pressure vessel steels
A537 CL1 ,ASTM A537 CL1 steel plate,ASTM A537 CL1 steel , under ASTM standard, we can regard A537 CL1 steel plate/sheet for simple pressure vessels steel.
A 537 Class 1carbon steel plates are engineered to be used in pressure vessel applications.A537 Class 1 steel plates shall be normalized in all of thickness. A 537 steel material usual be serviced the Gas, Petrochemical and Oil industry. The material of ASTM A537 Class 1 is a normalised steel which is heat treated and as a consequence displays greater yield and tensile strength than the more standard ASTM A516 grades. The steel is ideal for use in pressurised service both in boilers and pressure vessels and Masteel UK Limited supplies A537 Class 1 plates to the world's leading fabricators who in turn serve the Oil, Gas and Petrochemical industry.
ASTM A537 CL1 steel Chemical Composition % :
Main chemical composition in ASTM A537 CL1 steel: Carbon max 0.24, Manganese from 0.7 to 1.60, Sulphur max 0.035, Phosphorus max 0.035, Silicon from 0.15 to 0.50, More detailed information, please refer to the flowing table:
Grade |
Thickness |
Chemical composition %. |
||||||||
C. |
Si |
Mn |
P. |
S. |
Cu. |
Ni. |
Cr. |
Mo. |
||
A537CL 1 |
6.00-38.10 |
0.24 |
0.15-0.50 |
0.70-1.35 |
0.035 |
0.035 |
0.35 |
0.25 |
0.25 |
0.08 |
38.11-50.80 |
1.00-1.60 |
ASTM A537 CL1 steel Mechanical Properties
A537 CL1 this material is mainly used to fabricate boiler and pressure vessel. So ,same the other boiler and pressure vessel using steel plate, this kind of steel has the good grain and Mechanical properties. It's yield strength is between 50 MPa (there is different min strength point at the different thickness.) A537 CL1 tensile strength is from 70MPa to 90MPa. (different min strength point at the different thickness.) More detailed information about ASTM A537 CL1 steel Mechanical Properties , please refer to the following table:
Grade |
Tensile Test |
|||
Yield Strength |
Tensile Strength |
Elongation |
||
Test piece in(mm) |
%.min |
|||
A537 Class 1 |
50(345)min |
70-90 (485-620) |
GL=8(200) |
18 |
Shanghai katalor industry CO.,Ltd Will return you with high-quality products and complete after-sale service with the lowest price. we committed to exceed customer’s expectation on the basis of quality, price, and delivery. We sincerely hope to establish long-term cooperation relationship with you on the basis of mutual benefit, reciprocity and common development.As A537 CL1 Mechanical and A537 CL1 suppliers,we can supply A537 CL1 Chemical,A537 CL1 Mechanical and A537 CL1 standard for you ,please click to contact us