- : 0086-21-61182423
- : 0086-21-61182425
- : [email protected]
- : Room 301,Unit 6,lane 2500,xiupu Road,Kangqiao Industrial Area,Pudong New District,Shanghai
- Improper welding of X80 pipeline may cause cracks
- Brief introduction of API X52 pipeline steel
- The difference between PSL1 and PSL2
- Harm of inclusions in X70 pipeline steel
- API 5L pipeline pipe
- X52 steel plate surface quality standards that need to be met
- The basic production process of API 5L X60 pipeline steel
- The key to Q460D steel welding process
- What does the heat treatment of Q690 Steel include?
- Reasons for choosing Q690D steel
EN 10083 C50 steel plate high carbon steel
C50 steel plate, EN 10083 C50 steel plate, C50 high carbon steel plate and sheet, EN10083 steel plate, C50 carbon steel supplier/Chinese C50 steel supplier, C50 steel price,C50 steel manufacturer.
C50 steel plate is one mainly of high carbon steel,the application of EN 10083 C50 steel plate is equal to JUS Č.16301,DIN17200 C50,NF AF70C55,JIS G 4051 S 50 C,SAE J 403-AISI 1049 / 1050,BS970 070 M 50.
C50 |
Comparison of steel grades |
|
JUS |
Č.16301 |
|
DIN |
C50 |
|
BS970 |
070 M 50 |
|
GOST |
- |
|
SAE J 403-AISI |
1049 / 1050 |
|
JIS G 4051 |
S 50 C |
|
NF |
(AF70C55) |
Main chemical composition in EN10083-2 C50 steel : Carbon: from 0.47 to 0.55, Manganese from 0.60 to 0.90, Sulphur max 0.045, Phosphorus max 0.045, Silicon max 0.40, More detailed information, please refer to the flowing table:
Chemical Composition of C50 steel
Chemical elements |
C |
Si |
Mn |
P |
S |
Cr |
Mo |
Ni |
Cr+Mo+Ni |
%, by mass |
0,47-0,55 |
0,40 |
0,60-0,90 |
0,045 |
0,045 |
0,40 |
0,10 |
0,40 |
0,63 - |
Permissible deviation |
± 0,02 |
+ 0,03 |
± 0,04 |
+ 0,005 |
+ 0,005 |
+ 0,05 |
+ 0,03 |
+ 0,05 |
C50 high carbon steel has the good grain and Mechanical properties. It's yield strength is between 320-610 MPa ,C50 tensile strength is from290MPa to 590MPa. More detailed information about EN10083-2 C50 steel Mechanical Properties , please refer to the following table:
Mechanical Properties of C50 steel
Thickness of ruling section tR |
|||||
Diameter in mm |
tR ≤ 100mm |
100< tR≤250mm |
250< tR≤500mm |
500< tR≤1000mm |
|
Re min (N/mm2) |
320 |
290 |
- |
- |
|
Rm min (N/mm2) |
610 |
590 |
- |
- |
|
A % min. |
l-longitudinal |
14 |
14 |
- |
- |
tr -transverse |
- |
- |
- |
- |
|
KV min * (J) |
l-longitudinal |
- |
- |
- |
- |
tr -transverse |
- |
- |
- |
- |
Shanghai katalor industry CO.,Ltd Will return you with high-quality products and complete after-sale service with the lowest price. we committed to exceed customer’s expectation on the basis of quality, price, and delivery. We sincerely hope to establish long-term cooperation relationship with you on the basis of mutual benefit, reciprocity and common development.As C50 Mechanical and C50 suppliers,we can supply C50 Chemical,C50 Mechanical and C50 standard for you ,please click to contact us