- : 0086-21-61182423
- : 0086-21-61182425
- : [email protected]
- : Room 301,Unit 6,lane 2500,xiupu Road,Kangqiao Industrial Area,Pudong New District,Shanghai
- Improper welding of X80 pipeline may cause cracks
- Brief introduction of API X52 pipeline steel
- The difference between PSL1 and PSL2
- Harm of inclusions in X70 pipeline steel
- API 5L pipeline pipe
- X52 steel plate surface quality standards that need to be met
- The basic production process of API 5L X60 pipeline steel
- The key to Q460D steel welding process
- What does the heat treatment of Q690 Steel include?
- Reasons for choosing Q690D steel
EN10025 S355NL Steel Plates
S355NL steel, under EN10025-3 standard S355NL grade, under EN10025-3 standard, we can regard S355NL material as low alloy steel
S355NL steel plate is one mainly of low alloy steel, The normalized rolled fine-grain structural steel S355NL is characterized by a minimum yield strength of 355 MPa, by good weldability and high resistance to brittle fracture, which is same with DIN:TStE355 and BS:55EE
Equivalent grade :
S355NL steel plate/sheet is in EN10025 standard. It's grade Number is 1.0456. The equal material of S355NL is: UNE36081 AE 355 KT,DIN17102 T StE 355,UN Fe E 355 KT N,NFA36 201 E355FP, BS4360 50 EE.
S355NL EN 10025-3 MATERIAL# 1.0456 |
Comparison of steel grades |
|
UNE36081 |
AE 355 KT |
|
DIN17102 |
T StE 355 |
|
UN |
Fe E 355 KT N |
|
NFA36 201 |
E355FP |
|
BS4360 |
50 EE |
|
|
|
|
EN10025 S355NL steel Chemical Composition
Main chemical composition in EN10025 S355NL steel :Carbon max 0.18, Silicium max 0.50,Manganese max 0.90-1.65, Phosphorus max 0.025,Sulphur max 0.020. More detailed information, please refer to the flowing table:
Chemical elements |
C |
Si |
Mn |
P |
S |
Cu |
Cr |
Ni |
V |
Nb |
Al |
%,by mass |
0.18 |
0.50 |
0.90-1.65 |
0.025 |
0.020 |
0.55 |
0.30 |
0.50 |
0.12 |
0.05 |
0.02 |
EN10025 S355NL steel Mechanical Properties
EN10025 S355NL steel plate/sheet for carbon and low alloy steels, This kind of steel has very wide use. Because of the low Carbon content and without alloy element, carbon structural steel has the proper tensile strength, good toughness, plasticity,processing property. More detailed information about EN10025 S355NL steel Mechanical Properties , please refer to the following table:
thickness |
Yield Strength |
TensileStrengthRm[N/mm2]transv. |
Fracture Elongation[%]transv. min. |
Notch Impact |
t≤ 16mm |
355 |
|
|
+20 KV 40J |
t < 3mm |
|
470-630 |
|
|
Up to 1.5mm |
|
|
22 |
Shanghai Katalor Industry Co., Ltd Will return you with high-quality products and complete after-sale service with the lowest price. we committed to exceed customer’s expectation on the basis of quality, price, and delivery. We sincerely hope to establish long-term cooperation relationship with you on the basis of mutual benefit, reciprocity and common development.As S355NL Mechanical and S355NL suppliers,we can supply S355NL Chemical,S355NL Mechanical and S355NL standard for you ,please click to contact us