- : 0086-21-61182423
- : 0086-21-61182425
- : [email protected]
- : Room 301,Unit 6,lane 2500,xiupu Road,Kangqiao Industrial Area,Pudong New District,Shanghai
- Improper welding of X80 pipeline may cause cracks
- Brief introduction of API X52 pipeline steel
- The difference between PSL1 and PSL2
- Harm of inclusions in X70 pipeline steel
- API 5L pipeline pipe
- X52 steel plate surface quality standards that need to be met
- The basic production process of API 5L X60 pipeline steel
- The key to Q460D steel welding process
- What does the heat treatment of Q690 Steel include?
- Reasons for choosing Q690D steel
EN10111 DD11 steel plate
DD11,DD11 steel plate,EN10111 DD11 steel plate, under EN standard, EN10111 DD11 steel plate/sheet for stamping and cold forming steels,DD11 steel supplier/Chinese supplier, DD11 steel price,DD11 steel manufacturer.
DD11 steel plate/sheet is in EN10111 standard. It's grade Number is 1.0332. The equal material of DD11 is: DIN 1614 STW22, NFA 36-301 1C, UNI5867 FEP11, BS1449 HR3,UNE36.093 AP11, ASTM-SAE A621DQ-SAE1010,JIS G 3131 SPHD.
DD11 EN 10111 Number: 1.0332 |
Comparison of steel grades |
|
UNI5867 |
FEP11 |
|
DIN1614 |
STW22 |
|
NFA 36-301 |
1C |
|
JIS G 3131 |
SPHD |
|
ASTM-SAE |
A621DQ-SAE1010 |
|
BS1449 |
HR3 |
|
UNE36.093 |
AP11 |
Main chemical composition in EN10111 DD11 steel: Carbon:max 0.12, Manganese max 0.60, Sulphur max 0.045, Phosphorus max 0.045. More detailed information, please refer to the flowing table:
DD11 steel Chemical analysis -% by mass*
Chemical elements |
C |
Si |
Mn |
P |
S |
DD11 |
0.12 |
-- |
0.60 |
0.045 |
0.045 |
EN10111 DD11 steel plate/sheet is stamping and cold forming steels,it is suitable for non-structural press work and forming.It's tensile strength is around 440 MPa (there is different min strength point at the different thickness.) DD11 yield strength is from 170MPa to 340 MPa. (different min strength point at the different thickness.) More detailed information about EN10111 DD11 steel Mechanical Properties , please refer to the following table:
Mechanical properties
thickness |
Yield Strength ReH [N/mm2] |
Tensile Strength Rm [N/mm2] transv. |
Fracture Elongation[%]transv. min. |
Bending Test transv.bending mandrel Ø angle = 180° s = plate thickness |
t≤ 16mm |
170-340 |
|
|
1 S |
t < 3mm |
|
440 |
|
|
Up to 1.5mm |
|
|
23 A80 28 A5 |
Shanghai katalor industry CO.,Ltd Will return you with high-quality products and complete after-sale service with the lowest price. we committed to exceed customer’s expectation on the basis of quality, price, and delivery. We sincerely hope to establish long-term cooperation relationship with you on the basis of mutual benefit, reciprocity and common development.As DD11 Mechanical and DD11 suppliers,we can supply DD11 Chemical,DD11 Mechanical and DD11 standard for you ,please click to contact us