- : 0086-21-61182423
- : 0086-21-61182425
- : [email protected]
- : Room 301,Unit 6,lane 2500,xiupu Road,Kangqiao Industrial Area,Pudong New District,Shanghai
- Improper welding of X80 pipeline may cause cracks
- Brief introduction of API X52 pipeline steel
- The difference between PSL1 and PSL2
- Harm of inclusions in X70 pipeline steel
- API 5L pipeline pipe
- X52 steel plate surface quality standards that need to be met
- The basic production process of API 5L X60 pipeline steel
- The key to Q460D steel welding process
- What does the heat treatment of Q690 Steel include?
- Reasons for choosing Q690D steel
EN10111 DD12 steel plate
DD12,DD12 steel plate, EN10111 DD12 steel plate, under EN standard, EN10111 DD12 steel plate/sheet for stamping and cold forming steels,DD12 steel supplier/Chinese supplier, DD12 steel price,DD12 steel manufacturer.
DD12 steel plate/sheet is in EN10111 standard. It's grade Number is 1.0398. The equal material of DD12 is: DIN 1614 RRSTW23,ASTM-SAE A621DQ-SAE1008,JIS G 3131 SPHE.
DD12 |
Comparison of steel grades |
|
UNI5867 |
- |
|
DIN1614 |
RRSTW23 |
|
NFA 36-301 |
- |
|
JIS G 3131 |
SPHE |
|
ASTM-SAE |
A621DQ-SAE1008 |
|
UNE36.093 |
- |
Main chemical composition in EN10111 DD12 steel: Carbon max 0.10, Manganese max 0.45,Phosphorus max 0.035, Sulphur max 0.035,More detailed information,please refer to the flowing table:
DD12 steel Chemical analysis -% by mass*
Chemical elements |
C |
Si |
Mn |
P |
S |
DD12 |
0.10 |
-- |
0.45 |
0.035 |
0.035 |
EN10111 DD12 steel plate/sheet is stamping and cold forming steels,it is suitable for non-structural press work and forming.It's yield strength is between 170 to 320 MPa (there is different min strength point at the different thickness.) DD12 tensile strength is from around 420 MPa. (different min strength point at the different thickness.) More detailed information about EN10111 DD12 steel Mechanical Properties , please refer to the following table:
Mechanical properties
thickness |
Yield Strength ReH [N/mm2] |
Tensile Strength Rm [N/mm2] transv. |
Fracture Elongation[%]transv. min. |
Bending Test transv.bending mandrel Ø angle = 180° s = plate thickness |
t≤ 16mm |
170-320 |
|
|
0 S |
t < 3mm |
|
420 |
|
|
Up to 1.5mm |
|
|
25 A80 30 A5 |
Shanghai katalor industry CO.,Ltd Will return you with high-quality products and complete after-sale service with the lowest price. we committed to exceed customer’s expectation on the basis of quality, price, and delivery. We sincerely hope to establish long-term cooperation relationship with you on the basis of mutual benefit, reciprocity and common development.As DD12 Mechanical and DD12 suppliers,we can supply DD12 Chemical,DD12 Mechanical and DD12 standard for you ,please click to contact us