- : 0086-21-61182423
- : 0086-21-61182425
- : [email protected]
- : Room 301,Unit 6,lane 2500,xiupu Road,Kangqiao Industrial Area,Pudong New District,Shanghai
- Improper welding of X80 pipeline may cause cracks
- Brief introduction of API X52 pipeline steel
- The difference between PSL1 and PSL2
- Harm of inclusions in X70 pipeline steel
- API 5L pipeline pipe
- X52 steel plate surface quality standards that need to be met
- The basic production process of API 5L X60 pipeline steel
- The key to Q460D steel welding process
- What does the heat treatment of Q690 Steel include?
- Reasons for choosing Q690D steel
EN10111 DD14 steel plate
DD14,DD14 steel plate,EN10111 DD14 steel plate, under EN standard, EN10111 DD14 steel plate/sheet for stamping and cold forming steels,DD14 steel supplier/Chinese supplier, DD14 steel price,DD14 steel manufacturer.
DD14 steel plate/sheet is in EN10111 standard. It's grade Number is 1.0389. The equal material of DD14 is:NFA 36-301 3CT.
DD14 EN 10111 Number: 1.0389 |
Comparison of steel grades |
|
UNI5867 |
- |
|
BS1449 |
- |
|
NFA 36-301 |
3CT |
|
JIS G 3131 |
- |
|
ASTM-SAE |
- |
|
UNE36.093 |
- |
Main chemical composition in EN10111 DD14 steel: Carbon:max 0.08, Manganese max 0.35, Sulphur max 0.025, Phosphorus max 0.025. More detailed information, please refer to the flowing table:
Chemical analysis -% by mass*
Chemical elements |
C |
Si |
Mn |
P |
S |
DD14 |
0.08 |
-- |
0.35 |
0.025 |
0.025 |
EN10111 DD14 steel plate/sheet is stamping and cold forming steels,it is suitable for non-structural press work and forming.It's yield strength is between 170 to 320 MPa (there is different min strength point at the different thickness.) DD14 tensile strength is around 380 MPa. (different min strength point at the different thickness.) More detailed information about EN10111 DD14 steel Mechanical Properties , please refer to the following table:
Mechanical properties
thickness |
Yield Strength ReH [N/mm2] |
Tensile Strength Rm [N/mm2] transv. |
Fracture Elongation[%]transv. min. |
Bending Test transv.bending mandrel Ø angle = 180° s = plate thickness |
t≤ 16mm |
170-320 |
|
|
0 S |
t < 3mm |
|
380 |
|
|
Up to 1.5mm |
|
|
31 A80 36 A5 |
Shanghai katalor industry CO.,Ltd Will return you with high-quality products and complete after-sale service with the lowest price. we committed to exceed customer’s expectation on the basis of quality, price, and delivery. We sincerely hope to establish long-term cooperation relationship with you on the basis of mutual benefit, reciprocity and common development.As DD14 Mechanical and DD14 suppliers,we can supply DD14 Chemical,DD14 Mechanical and DD14 standard for you ,please click to contact us