- : 0086-21-61182423
- : 0086-21-61182425
- : [email protected]
- : Room 301,Unit 6,lane 2500,xiupu Road,Kangqiao Industrial Area,Pudong New District,Shanghai
- Improper welding of X80 pipeline may cause cracks
- Brief introduction of API X52 pipeline steel
- The difference between PSL1 and PSL2
- Harm of inclusions in X70 pipeline steel
- API 5L pipeline pipe
- X52 steel plate surface quality standards that need to be met
- The basic production process of API 5L X60 pipeline steel
- The key to Q460D steel welding process
- What does the heat treatment of Q690 Steel include?
- Reasons for choosing Q690D steel
EN10155 S355J0WP
S355J0WP,S355J0WP steel plate,EN S355J0WP steel,EN10155 S355J0WP steel plate/sheet, EN10155 S355J0WP steel plate/sheet for atmospheric corrosion resistance, S355J0WP carbon steel used for resisting atmospheric corrosion , EN10155 steel plate for atmospheric corrosion resistance,S355J0WP steel supplier
/Chinese supplier, S355J0WP steel price
Equivalent grade :
S355J0WP steel plate/sheet is in EN10155 standard. It's grade Number is 1.8945. The equal material of S355J0WP is: NFA 35-502 E36W3, UNI Fe510C1K1, BS4360 WR50A
|
S355J0WP |
BS4360 |
WR50A |
|
NFA 35-502 |
E36W3 |
|
|
UNI |
Fe510C1K1 |
EN10155 S355J0WP steel Chemical Composition
Main chemical composition in EN10155 S355J0WP steel : Carbon: max 0.12 , Manganese MAX 1.00 , Silicon max 0.75 , Sulphur max 0.03, Phosphorus from 0.06-0.15 , More detailed information, please refer to the flowing table:
|
C % |
Mn % |
Cr % |
Si % |
CEV % |
S % |
|
Max 0.12 |
Max 1 |
0.3-1.25 |
Max 0.75 |
Max 0.52 |
Max 0.035 |
|
Cu % |
P % |
N % |
|
|
|
|
0.25-0.55 |
0.06 - 0.15 |
Max 0.009 |
|
|
|
Method of deoxidation FN = rimming steels not permitted.
CEV= C+MN/6+(Cr+Mo+V)/5+(Ni+Cu)/15
For long products the P and S content can be 0.005% higher.
The S355J0WP steels may show a Ni content of max. 0,65 %.
The max. value for nitrogen does not apply if the chemical composition shows a minimum total Al content of 0,020 % or if sufficient other N binding elements are present. The N binding elements shall be mentioned in the inspection document
EN10155 S355J0WP steel Mechanical Properties
The tensile test values given in the table apply to longitudinal samples; in case of strip and sheet steel of widths of ≥600 mm they apply to transverse samples.
If S355J0WP mechanical properties have been significantly modified by heavy coldforming, either stress relief annealing or normalised may be applied. Normalised should also be applied following hotforming outside of the temperature range of 750 - 1.050 °C and after overheating.
More detailed information about EN10155 S355J0WP steel Mechanical Properties , please refer to the following table:
|
Grade |
Min. Yield Strength Mpa |
Tensile Strength MPa |
Impact |
||||||||
|
S355J0WP |
Nominal Thickness (mm) |
Nominal Thickness (mm) |
degree |
J |
|||||||
|
Thick mm |
≤16 |
>16 |
>40 |
>63 |
>80 |
>100 |
≤3 |
>3 ≤100 |
>100 ≤150 |
0 |
27 |
|
S355J0WP |
355 |
345 |
…. |
…. |
…. |
…. |
510-680 |
470-630 |
…. |
||
Shanghai katalor industry Co.,Ltd Will return you with high-quality products and complete after-sale service with the lowest price. we commite to exceed customer's expectation on the basis of quality, price, and delivery. We sincerely hope to establish long-term cooperation relationship with you on the basis of mutual benefit, reciprocity and common development.As S355J0WP Mechanical and S355J0WP suppliers,we can supply S355J0WP Chemical,S355J0WP Mechanical and S355J0WP standard for you ,please click to contact us
