- : 0086-21-61182423
- : 0086-21-61182425
- : [email protected]
- : Room 301,Unit 6,lane 2500,xiupu Road,Kangqiao Industrial Area,Pudong New District,Shanghai
- Improper welding of X80 pipeline may cause cracks
- Brief introduction of API X52 pipeline steel
- The difference between PSL1 and PSL2
- Harm of inclusions in X70 pipeline steel
- API 5L pipeline pipe
- X52 steel plate surface quality standards that need to be met
- The basic production process of API 5L X60 pipeline steel
- The key to Q460D steel welding process
- What does the heat treatment of Q690 Steel include?
- Reasons for choosing Q690D steel
P355NL1
P355NL1,P355NL1 steel,EN P355NL1 steel plate,EN 10028 P355NL1 steel plate/sheet for Boilers and Pressure Vessels
Katalor industry has P355NL1 steel plate/sheet, EN 10028 P355NL1 steel plate/sheet, EN 10028 P355NL1 steel plate/sheet for Boilers and Pressure Vessel steel, P355NL1 steel plate/sheet for Boilers and Pressure Vessel, EN 10028 steel plate for Boilers and Pressure Vessel using, P355NL1 steel supplier/Chinese supplier, P355NL1 steel price
Equivalent grade :
P355NL1 steel plate/sheet is in EN 10028 standard. The equal material of P355NL1 steel is: DIN 17102 TStE 355
P355NL1 |
Comparison of steel grades |
|
EU 113 |
- |
|
NBN629 |
- |
|
DIN 17102 |
T St E 355 |
|
NFA36201 |
- |
EN 10028 P355NL1 steel Chemical Composition % :
Main chemical composition in EN 10028 P355NL1 steel: Carbon Max 0.18, Manganese from 1.10 to 1.70, Sulphur max 0.015, Phosphorus max 0.025, Silicon max 0.50, More detailed information, please refer to the flowing table:
Grades |
C |
Si max |
Mn. |
P |
S |
N |
AL |
Cr max |
Cu max |
Mo max |
Ni max |
Nb max |
Ti max |
V |
P355NL1 |
0.18 |
0.50 |
1.10-1.70 |
0.025 |
0.015 |
0.012 |
0.020 |
0.300 |
0.30 |
0.08 |
0.50 |
0.05 |
0.03 |
0.10 |
EN 10028 P355NL1 steel Mechanical Properties
P355NL1 this material is mainly used to fabricate boiler and pressure vessel. So ,same the other boiler and pressure vessel using steel plate, this kind of steel has the good grain and Mechanical properties. It's yield strength is between 295- 355 MPa (there is different min strength point at the different thickness.) P355NL1 tensile strength is from 450MPa to 630MPa. (different min strength point at the different thickness.) More detailed information about EN 10028 P355NL1 steel Mechanical Properties , please refer to the following table:
Grade |
Thickness |
Yield Strength |
Tensile Strength |
Elongation |
P355NL1 |
≤ 16 |
355 |
490 to 630 |
21 |
16<t ≤40 |
345 |
490 to 630 |
21 |
|
40<t ≤60 |
335 |
490 to 630 |
21 |
|
6<t ≤100 |
315 |
470 to 610 |
21 |
|
100<t ≤150 |
305 |
460 to 600 |
21 |
|
150<t ≤250 |
295 |
450 to 590 |
21 |
Shanghai katalor industry CO.,Ltd Will return you with high-quality products and complete after-sale service with the lowest price. we committed to exceed customer's expectation on the basis of quality, price, and delivery. We sincerely hope to establish long-term cooperation relationship with you on the basis of mutual benefit, reciprocity and common development.As P355NL1 Mechanical and P355NL1 suppliers,we can supply P355NL1 Chemical,P355NL1 Mechanical and P355NL1 standard for you ,please click to contact us